Shuttle Valves
GAS Cartridge - 350 bar
Direct acting - Ball Type
Description
Technical Features
Symbol
Cross Section
286
Cavity Details
VH021
SHV0.G12 Valve Series
All valve parts are made of high strength ste-
el to guarantee minimal wear and to extend
service life. The very compact size make it
suitable for installation into hydraulic integra-
ted circuits, control units, and various valve
combinations. Gas cavity.
Shut-off valves for hydraulics systems,
with two inlets and one outlet. Ball seat
construction, automatic switching. The
inlet with the higher pressure (port 1 or 3)
is directly connected to tank (port 2), while
the second inlet (port 3 or 1) is shut off.
Technical Data
Performance Details
Ordering Code
287
Flow (l/min)
Pressure (bar)
Specications may change without notice.
Maximum operating pressure 350 bar
Maximum flow 50 l/min
Mamimum internal leakage 0,25 cm
3
/ min @ 350 bar
O-ring Temperature Range -30° C to 110° C (standard sealing NBR - BUNA-N)
Oil Temperature Range -30° C to 110° C
Fluids Mineral - based or synthetics with lubricating properties
Viscosities 7,4 to 420 cSt
Filtration 20/18/15 ISO 4406 (maximum ltration admitted)
Orientation No restrictions
Installation torque 20-22 Nm (Hex. 8)
Technical specications for characterization See page 480
Oil testing condition ISO VG 46 cSt
Seal kit code SK.026
Weight 0,051 kg
Note: The performance
chart illustrates flow han-
dling capacity in max flow
condition.
p/Q curves are recorded at
TOil = 40°C and 46 cSt
